New Wii Mobo (pretty much disables modding of ease)

Blue^Ray · 31st May 2007, 04:13 AM

http://www.neoasic.com/images/wii-chipsetcut-logo.jpg

take a look at those pics.

They cut the pins directly from the chip

BTW would this be the 3rd revision?

extreme101 · 31st May 2007, 09:10 AM

moved the thread to gaming section.

So i assume those pins are the ones needed to solder some wires to, to connect to the modchip?

Blue^Ray · 31st May 2007, 02:07 PM

Quote:

Originally Posted by extreme101

moved the thread to gaming section.

So i assume those pins are the ones needed to solder some wires to, to connect to the modchip?

yea 3 pins needed to install a wiikey

Micksxboxmods · 25th September 2007, 10:22 PM

piece of piss boys, if ya know how to 'throw a soldering iron around'!

Mick

extreme101 · 25th September 2007, 10:35 PM

i dont know looks hard. would you have to solder it striaght onto the 'liitle' metal still on the chip? and not heat the chip too much.

Micksxboxmods · 25th September 2007, 10:37 PM

Quote:

Originally Posted by extreme101

i dont know looks hard. would you have to solder it striaght onto the 'liitle' metal still on the chip? and not heat the chip too much.

using a dremel on a chip about 15mmX 15mm is not for the faint hearted either...lol

shagga66 · 26th September 2007, 10:30 PM

Quote:

Originally Posted by Micksxboxmods

using a dremel on a chip about 15mmX 15mm is not for the faint hearted either...lol

Thats why I sent mine to you Mick.....I get the shakes with that sort of thing...

Micksxboxmods · 26th September 2007, 11:08 PM

Quote:

Originally Posted by shagga66

Thats why I sent mine to you Mick.....I get the shakes with that sort of thing...

LOL..you should get it tomorrow or Friday mate as already sent back.

I don't use the dremel, I do it a much safer, neater way now.

Blue^Ray · 29th September 2007, 03:47 AM

Quote:

Originally Posted by Micksxboxmods

LOL..you should get it tomorrow or Friday mate as already sent back.

I don't use the dremel, I do it a much safer, neater way now.

This thread is quite old but im guessing you use the razor blade method (very professional looking) or you rebuild the legs and solder directly to the little bit of leg left.

I have yet to recieve a D2B with cut legs

. I mainly resell and only install when the customer cannot or the customer stuffs up.

Just hoping this new D2C chip is hacked soon so I can get a little more busines

Micksxboxmods · 29th September 2007, 09:14 AM

Quote:

Originally Posted by Blue^Ray

This thread is quite old but im guessing you use the razor blade method (very professional looking) or you rebuild the legs and solder directly to the little bit of leg left.

I have yet to recieve a D2B with cut legs

. I mainly resell and only install when the customer cannot or the customer stuffs up.

Just hoping this new D2C chip is hacked soon so I can get a little more busines

no don't use razor blade either.
I use a points file and NEATLY remove the required amount and either rebuild the legs or connect wires to exposed legs on chip.

Supposedly a developmemt woth d2c chips coming within a few weeks, 20 odd point chips again though unfortunately.

31st May 2007, 04:13 AM	#1 (permalink)
Blue^Ray www.ausxmods.com Join Date: Nov 2006 Posts: 198 iTrader: (3) Thanks: 0 Thanked 0 Times in 0 Posts Rep Power: 3	New Wii Mobo (pretty much disables modding of ease) http://www.neoasic.com/images/wii-chipsetcut-logo.jpg take a look at those pics. They cut the pins directly from the chip BTW would this be the 3rd revision? __________________ ausxmods wiikey wiikey sd adapter

25th September 2007, 10:22 PM	#4 (permalink)
Micksxboxmods Super Moderator Join Date: Dec 2006 Location: Central Coast/ Newcastle Posts: 548 iTrader: (17) Thanks: 15 Thanked 3 Times in 3 Posts Rep Power: 7	Re: New Wii Mobo (pretty much disables modding of ease) piece of piss boys, if ya know how to 'throw a soldering iron around'! Mick __________________

25th September 2007, 10:35 PM	#5 (permalink)
extreme101 Administrator Join Date: Nov 2006 Location: Melbourne Posts: 1,324 iTrader: (5) Thanks: 7 Thanked 16 Times in 13 Posts Rep Power: 16	Re: New Wii Mobo (pretty much disables modding of ease) i dont know looks hard. would you have to solder it striaght onto the 'liitle' metal still on the chip? and not heat the chip too much.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

31st May 2007, 09:10 AM	#2 (permalink)
extreme101 Administrator Join Date: Nov 2006 Location: Melbourne Posts: 1,324 iTrader: (5) Thanks: 7 Thanked 16 Times in 13 Posts Rep Power: 16	moved the thread to gaming section. So i assume those pins are the ones needed to solder some wires to, to connect to the modchip?

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)